|
|
Stock Classes
Below is a summary of the different series of products which are applicable to stock class oval racing. Click on the damper series for more detailed information on that type of damper.
The KONI Special/Sport was designed primarily as a street unit but can be adjusted up to better control the transitions as needed on an oval. When available, a Sport damper will generally be the better choice but, the Special damper will always show improvement over an original equipment damper. To check on applications available click here or on the damper series above.
«Back
Most KONI shocks are rebuildable or re-valveable to meet your specific requirements. Depending on the series and condition of the damper re-valve cost is $100 and up if you supply the damper.
«Back
Most KONI shocks can be converted to external adjustment, shortened, or converted to double adjustable. Contact the KONI shop to see if this is available for your application.
«Back
The 8610 series racing damper is a universal strut insert that can be used in many different applications. The KONI 8610 offers externally adjustable rebound damping with unique valving characteristics that have been developed in conjunction with many top racing teams and chassis builders. The piston rod of is designed to fit through a 5/8" bearing /camber plate assembly.
«Back
The 8611 series double adjustable strut insert is a universal strut insert that can be used in many different applications. Originally designed for European touring car classes utilizing strut suspensions, the 8611 have become an affordable double adjustable option for club racers and autocrossers in North America.
The KONI 8611 series is a twin-tube hydraulic that is externally adjustable in both rebound and compression damping. The compression adjuster is located in bottom end of the strut cartridge and requires a ˝" diameter hole to be made in the bottom of the strut housing for access to the adjuster.
«Back
KONI can fabricate anything you may need. We can take your existing strut housings and install our internals; we refer to this as a wet kit. We can make a wet kit single adjustable or double adjustable depending on your budget. We can convert the strut body to utilise a coil-over sleeve or we can modify the housing to meet specific needs. KONI can also fabricate shocks or strut inserts. Let us know your needs and we can give you a cost.
«Back
KONI
North America - Racing Division
1961 International
Way • Hebron • KY • 41048
Telephone: (859) 586-4100 • Fax:(859) 334-3340
• contact koni
racing |
|
|
