Where to buy Company information Contact KONI KONI Links Racing Products Shop Services
Autocross Products Road Racing Products Oval Track Products Drag Racing Products

KONI North America Home
KONI Racing Home

 
Autocross products
Road Racing products
Oval Track Products
Drag Racing Products

ITT Logo

Drag Racing

Stock Classes


Below is a summary of the different series of products which are applicable to stock class drag racing. Click on the damper series for more detailed information on that type of damper. KONI SPA1 is a different theory than other shock manufacturers. Details of this theory can be found at this link.


KONI SPA1

The KONI SPA1 was designed as an adjustable drag racing only damper. These units are of stock mounting style and are available primarily for RWD domestic applications. They allow optimum transition at launch with a quick transition back to a level attitude allowing less air to be trapped under the nose of the car and improving ETs. To check on applications available click here or on the damper series above.

«Back

KONI Special/Sport

The KONI Special/Sport was designed primarily as a street unit. When available, a Special damper will generally be the better choice for RWD drag racing. While the Sport damper will generally be better for FWD drag racing. For AWD the best setup is determined by how the center differential works on your application. To check on applications available click here or on the damper series above.

«Back

KONI Sport, Special, or SPA1 re-valve

Most KONI shocks are rebuildable or re-valveable to meet your specific requirements. Depending on the series and condition of the damper re-valve cost is $100 and up if you supply the damper.

«Back

KONI Sport, Special, or SPA1 custom shop conversion

Most KONI shocks can be converted to external adjustment, shortened, or converted to double adjustable. Contact the KONI shop to see if this is available for your application.

«Back

KONI wet kit conversion

KONI can fabricate anything you may need. We can take your existing strut housings and install our internals; we refer to this as a wet kit. We can make a wet kit single adjustable or double adjustable depending on your budget. We can convert the strut body to utilise a coil-over sleeve or we can modify the housing to meet specific needs. KONI can also fabricate shocks or strut inserts. Let us know your needs and we can give you a cost.

«Back

 

KONI North America - Racing Division
1961 International Way • Hebron • KY • 41048
Telephone: (859) 586-4100 • Fax:(859) 334-3340

contact koni racing