8610 Universal Racing Strut Insert

The 8610-1149 McPherson strut cartridge insert fits a variety of strut housings. The KONI 8610-1149 offers externally adjustable rebound damping with unique valving charictaristics that have been developed in conjunction with many top racing teams and chassis builders. The piston rod is designed to fit through a 5/8" bearing/camber plate assembly. To determine the correct fitting of an 8610-1149, please follow these guidelines: Measure the inside depth of your strut housing. (NOTE: At this time also make certain that the inside diameter of your housing is large enough to accept the KONI insert, which has an O.D. of 43.5mm, 1.71".) For the KONI insert to be installed properly the measured depth of your strut housing must be 326-329mm (12.83" - 12.95"). In the event that your existing housing depth is greater than the above recommended depth, the user must then fabricate a spacer and place it under the KONI insert so as to achieve the proper depth relationship. The 8610-1149 is supplied with a threaded locknut M48x1.5 (thread and pitch)to retain the insert into the strut housing. If a different locknut is required for you application, please refer to the chart below to determine which part number you need when placing your order.

«Back

---

KONI North America - Racing Division 1961 International Way • Hebron • KY • 41048 Telephone: (859) 586-4100 • Fax:(859) 334-3340 • contact koni racing