|
2812LB Series mono-tube double adjustable dampers
 | To accommodate the longer strokes for touring cars KONI have developed a long stroke type of 2812. The long stroke damper is supplied with 1/2” ID bearings in the cylinder eye. For this reason normally only the tops W, O, Y, Z (see table 4) are delivered, but all other tops are available upon request.
|
0º adjustment window |
90º adjustement window |
| 2” spring |
W |
Y |
| 2 1/4” spring |
O |
Z |
Table 4: top eyes of 2812 long body
For the dimensions of the top eyes see figure 6.
Long body 2812 dampers have a stroke from 114 up to 224 mm. However it is recommended not to use the full stroke under dynamic conditions when the Lmax is over 500 mm. Upon request droop limiters can be installed to limit the static Lmax length.
The dimensions of the bottom of the damper can be seen in figure 5. Upon special request different bottoms or tops can be made.
For information on damper valvings see the valving page.
| | Figure 5: 2812 long body. |
|
